Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

10.1 Inch

Go to Charging Cradle for ET5X 10.1 in Frame; Key Lock, USB
Item 539892
  • APPROVED FOR FORKLIFT INSTALLATIONS
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame with the 30-Pin Connector installed
  • Reinforced Acetal Corner Bumpers
  • Key Locking
  • USB 3.0 Port for attaching peripherals
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip standard-duty or heavy-duty forklift mounts.
  • Power Supply Sold Separately (See accessories tab at the bottom of the product page)
$359.99 USD
Go to Heavy Duty Charging Cradle for ET5X 10.1, Frame, X-Back, Key Lock, USB
Item 539960
  • APPROVED FOR FORKLIFT INSTALLATIONS
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame with the 30-Pin Connector installed
  • Reinforced Acetal Corner Bumpers
  • Accommodates Scanner Module (Can not scan while docked)
  • Key Locking
  • USB 3.0 Port for attaching peripherals
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip standard-duty or heavy-duty forklift mounts.
  • Power Supply Sold Separately (See accessories tab at the bottom of the product page)

 

Standard website promos do not apply to this item.

$399.99 USD
Go to Charging Cradle for ET5X 10.1, Frame, X-Back, Key Lock, USB, Scanner Window
Item 550888
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame with the 30-Pin Connector installed
  • Reinforced Acetal Corner Bumpers
  • Scan Window - Enables scanning while the tablet is docked
  • Key Locking
  • USB 3.0 Port for attaching peripherals
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip standard-duty or heavy-duty forklift mounts.
  • Power Supply Sold Separately (See accessories tab at the bottom of the product page)

Standard website promos do not apply to this item.

$379.99 USD
Go to Charging Cradle for ET5X 10.1, Frame, X-Back, USB, Scanner Window, (No Lock)
Item 563914
  • FITS ET5X 10.1 TABLET IN ZEBRA RUGGED FRAME WITH EXPANSION MODULE
  • ACCOMMODATES SCANNER MODULE
  • NON-LOCKING
  • USB 3.0 PORT FOR ATTACHMENT OF PERIPHERALS
  • AMPS AND 75mm VESA MOUNTING HOLES
  • RECOMMENDED MOUNTS: PROCLIP HEAVY DUTY FORKLIFT OR PEDESTAL MOUNTS
  • POWER SUPPLY SOLD SEPARATELY; (SEE ACCESSORIES TAB ON PRODUCT PAGE)

 

Standard website promos do not apply to this item.

$359.99 USD
Go to Holder for ET5X 10.1, Frame, X-Back without Scanner
Item 511914
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame with the 30-Pin Connector installed
  • Accommodates Scanner Module (Can not scan while docked)
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip mounts and pedestals.

Standard website promos do not apply to this item.

$249.99 USD
Go to Holder with Key Lock - Fits Rugged Frame and X-Back
Item 510810
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame
  • Scan Window - Enables scanning while the tablet is docked
  • Key Locking
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip mounts and pedestals.

Standard website promos do not apply to this item.

$279.99 USD
Go to Holder with Spring Lock, Scan Window and Hot-Swap Battery Slot
Item 241695
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame
  • Hot-Swap Battery Slot - Battery can be changed while docked
  • Expansion Back - Open back accommodates Expansion Back Module
  • Scan Window - Enables scanning while the tablet is docked
  • Spring Locking
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip mounts and pedestals.

Standard website promos do not apply to this item.

$269.99 USD
Go to Holder with Key Lock, Scan Window and Hot-Swap Battery Slot
Item 241663
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame
  • Hot-Swap Battery Slot - Battery can be changed while docked
  • Expansion Back - Open back accommodates Expansion Back Module
  • Scan Window - Enables scanning while the tablet is docked
  • Key Locking
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip mounts and pedestals.

Standard website promos do not apply to this item.

$279.99 USD
Go to Holder with Spring Lock (fits Zebra ET50 / ET55 10.1 tablet in Zebra Rugged Frame)
Item 241670

This is a special order item. Please allow an additional 2-3 week lead time.

  • APPROVED FOR FORKLIFT INSTALLATIONS
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame with the 30-Pin Connector installed
  • Reinforced Acetal Corner Bumpers
  • Spring Locking
  • AMPS and VESA 75/100 Mounting Holes
  • Recommended with ProClip standard-duty or heavy-duty forklift mounts.
  • Power Supply Sold Separately (See accessories tab at the bottom of the product page)
$224.99 USD
Go to Holder with Key Lock (fits Zebra ET50 / ET55 10.1 tablet in Zebra Rugged Frame)
Item 241671

This is a special order item. Please allow an additional 2-3 week lead time.

  • APPROVED FOR FORKLIFT INSTALLATIONS
  • Fits the Zebra ET5x 10.1" Tablet in the Rugged Frame with the 30-Pin Connector installed
  • Reinforced Acetal Corner Bumpers
  • Key Locking
  • AMPS and VESA 75MM Mounting Holes
  • Recommended with ProClip standard-duty or heavy-duty forklift mounts.
  • Standard website promos do not apply to this item.

$234.99 USD
Go to Holder - Key Lock for Zebra ET5X 10.1 Base Tablet
Item 522883

All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.

  • NOT FOR USE WITH FORKLIFTS
  • Key lock for security of tablet
  • Custom fit to base tablet without Rugged Frame or Holster Case.
  • Includes Tilt-Swivel to angle holder 15 degrees any direction
  • Rotate between portrait and landscape view

Standard website promos do not apply to this item.

$169.99 USD
Go to Holder - For Zebra ET5X 10.1 Bare Tablet
Item 510883
  • Custom fit to bare tablet
  • Does not angle or rotate; providing a solid mounting platform
  • Recommended with ProClip mounts and pedestals.

Standard website promos do not apply to this item.

$139.99 USD
Go to ET5X Power Supply with Barrel Plug and Cigarette Lighter Adapter
Item 941022
  • For use with cigarette lighter socket
  • Works in 12 or 24 volt vehicles
  • Barrel plug compatible with Zebra ET5X series charging holders

Standard website promos do not apply to this item.

$119.99 USD
Go to 48 / 36V to 12V Power Converter
Item 710872
  • For installation into vehicle power supply
  • Works with forklifts and other vehicles that use up to 48 volt direct current (VDC) power systems.
  • Input surge voltage of up to 60 VDC.
  • Converts 60V, 48V, 36V, 24V, and 18V systems to 12V
  • 36W continuous output

Standard website promos do not apply to this item.

$129.99 USD
Go to 12V Power Supply with Barrel Plug and US AC Plug
Item 710870
  • For use with US 110 volt outlets
  • Barrel plug fits matching socket on ET5X series charging holders
  • Output: 12 volt 4.16 amp

Standard website promos do not apply to this item.

$59.99 USD
Go to 12V Power Supply with Barrel Plug and EU AC Plug
Item 710871
  • For use with EU 220 volt outlets
  • Barrel plug fits matching socket on ET5X series charging holders
  • Output: 12 volt 4.16 amp

Standard website promos do not apply to this item.

$59.99 USD