48-12V DC Step Down Converter
$194.99
MSRP
48-12V DC Step Down Converter
$194.99
MSRPView this part and other business mounting solutions at:
Product Description
This DC Step Down Converter is designed to be used when your vehicle or machine is operating at 48 Volts DC. It converts 48VDC into clean and constant 12 Volt DC. It can also handle power fluctuations from 12 to 60 Volts and maintain clean output.
Using the DC Step Down Convertor allows a ProClip 12-24V Hard-Wired Power Supply to connect with a 48V power system. (Hard-Wired power supplies sold separately)
The included 9 foot input cable is pre-terminated to plug directly into the conversion box. This can be trimmed to size to fit directly onto the common battery bus or directly into an auxiliary power circuit in a vehicle or on machinery.
Features
- For installation into vehicle power supply
- Works with forklifts and other vehicles that use up to 48 volt direct current (VDC) power systems.
- Input surge voltage of up to 60 VDC.
- Converts 48V, 36V, 24V, and 18V systems to 12V
- 36W continuous output
Specifications
- Input Voltage: 48VDC nominal (12V to 60V)
- Output Voltage: 12dc +/-10%
- Continuous Current Rating: 12V at 3A
- Intermittent Current Rating: 12V at 6A for a maximum of 2 minutes followed by 8 minute rest
- Transient Voltage Protection: Meets ISO7637-2 International Standard for 24Vdc Commercial Vehicles
- Electro Static Voltage Protection: Meets ISO10605, ISO14982, >8kV contact, 15kV discharge
- Output Noise: <50mV pk-pk at continuous load
- Off load current (quiescent current): <30mA. If connected to the battery, but not powering any equipment
- Power Conversion Efficiency: Typically 80%
- Operating Temperature: -25°C to +30°C to meet these specs. +30°C to +80°C de-rate linearly to 0A
- Storage Temperature: -25°C to +100°C
Compatibilty
- Zebra ET50/51/55/56 10.1
- Zebra ET50/51/55/56 8.3 and 8.4
- Zebra ET51 8.4" with 1D/2D Barcode Scanner
Mounting Options
For easy and optimal installation combine the charging holder with one of the mount options shown below or attch it directly to any surface.
How To Install
Two Parts Make
THE ULTIMATEPHONE MOUNT.
Don't settle for cheap and flimsy car phone mounts that wobble in your vents or suction cups that constantly fall off. There's a better, more solid way to mount your cell phone.
Mounting Base
Our exact-fit mounting bases are made specifically for most car and truck models. The mounts easily snap into the seams of the dashboard for a solid and secure fit.
Phone Holder
Our holders are designed specifically for your smartphone, GPS or other mobile devices. Phone holder options can fit cell phones with or without cases, and charge wirelessly or with charging cables.
Perfect Solution
The perfect phone mount for your vehicle.
Easy to Install
Installing your phone mount is easy. It takes just a few minutes and you don't need a professional to help.
Perfect Fit
It's the perfect fit. Your phone is mounted securely so you can keep your eyes where they belong. On the road.
Built to Last
No more flimsy suction cups and vent clips. ProClip phone mounts are built to last with high-quality plastics.