Fasteners & Hardware

These black cap screws, lock nuts, flat washers and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a pedestal, Dashboard Back Plates VESA plate or anything with M4 through holes or brass inserts.

• Fastener pack for attaching a holder to a Quick Release Dock or ProClip Mount.
• 4 - M4 x 10mm, 14 and 20 mm machine screws with low profile 2.5 mm Hex heads.
• 4 - M4 Lock Nut, Flat Washer, Lock Washer
• 1 - 2.5 Allen Wrench

Standard website promos do not apply to this item.

• M2 Self-Tapping Screws
• 8MM Long, flat tip.
• Used for attaching quick release docks and other components to holders.

Standard website promos do not apply to this item.

These sturdy steel cap screws and lock nuts effectively secure the interlocking joints of our Heavy Duty and Super Duty pedestal mounts. Quick to adjust with only a 6 mm Allen Key, as the nut is securely held within the machined recess of the extension rod.

• Use to connect pedestal extension rods to each other and to pedestal bases
• Contents: 2 screws, 2 nuts, Allen key
• Quick and Easy to Adjust with 6mm Allen Key provided

Standard website promos do not apply to this item.

• Four Machine Screws - M4 x 12mm with 2.5mm hex drive
• Four Nyloc Nuts - M4 with 7mm drive
• Four Self-Tapping Screws for ProClip Mounts - 3.5mm thread, 19mm length
• Four Wall Anchors with Two Sets of Screws (Four 3.5 x 50mm screws & Four 3.5 x 40mm)

Standard website promos do not apply to this item.

These sturdy steel cap screws and lock nuts effectively secure the interlocking joints of our Heavy Duty and Super Duty pedestal mounts. Quick to adjust with only a 6 mm Allen Key, as the nut is securely held within the machined recess of the extension rod.

• Use to connect pedestal extension rods to each other and to pedestal bases
• Contents: 2 screws, 2 nuts, Allen key
• Quick and Easy to Adjust with 6mm Allen Key provided

Standard website promos do not apply to this item.

• Wing nuts for aluminum pedestal mounts
• Fits all extension rod sizes
• Metal spacer for use with ProClip pedestals
• 2 Wing Nuts / 2 Metal Spacers / 2 Bolts

Standard website promos do not apply to this item.

These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

• Use to connect device holders without Tilt-Swivel directly to pedestal mounts
• Use to attach Move Clips
• Pkg Contents: 4 screws, 4 nuts, Torx key

These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

• Use to connect device holders without Tilt-Swivel directly to pedestal mounts
• 4 - M4 x 18MM Hex 2.5MM head
• 4 - M4 Locknut
• 4 - M4 Washer (4.3MM x 12mm wide x 1mm thick)
• 4 - M4 Toothed Washer
• 1 - Allen Wrench Hex 2.5MM

Black Torx TX10 machine screws, Torx Wrench and Cable Clip replacement for ET5x cradles and similar products.

• 2 - M3 x 14MM Machine Screws TX10 Drive
• Torx Wrench
• Cable Clip - Threaded Brass Inserts

Standard website promos do not apply to this item.

Black Torx T10 machine screw, Allen Wrench, and Cable Clip replacement for ET5x USB cradles and similar products.

• 2 - M3 x 14MM Machine Screw Torx TX10
• Allen Wrench - Torx T10
• Cable Clip Machine Screws
  • Drive: Torx T10
  • Diameter: 3MM
  • Thread Length: 14MM
  • Finish: Black Oxide

Standard website promos do not apply to this item.

These Zinc cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

• Use to connect device holders without Tilt-Swivel directly to pedestal mounts
• Use to attach Move Clips
• Pkg Contents: 4 screws, 4 nuts, Torx key

These black cap screws and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a 4mm brass insert, (utilized in several of our ABS Bases or Adapter Plates) or to an M4 threaded metal plate, such as our Dashboard Back Plates or VESA plates.

• Use to attach a Tilt-Swivel Base or Pedestal Mount base to a 4mm brass insert or threaded metal plate
• Contents: 4 screws, 4 lock washers, 3 mm Allen key
• M4 Diameter
• 12 mm Thread
• 4 mm Head

Standard website promos do not apply to this item.

These black cap screws and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a 4mm brass insert, (utilized in several of our ABS Bases or Adapter Plates) or to an M4 threaded metal plate, such as our Dashboard Back Plates or VESA plates.

• Use to attach a Tilt-Swivel Base or Pedestal Mount base to a 4mm brass insert or threaded metal plate
• Contents: 4 screws, 4 lock washers, 3 mm Allen key
• M4 Diameter
• 10 mm Thread
• 4 mm Head

Standard website promos do not apply to this item.

• Use to attach a Forklift Clamp Mount to a flat bar or pipe.
• Includes M8 fasteners for the plates and M4 fasteners for the AMPS holes to attach a pedestal or other compatible equipment.

Standard website promos do not apply to this item.

• Extra screw set for aluminum pedestal mounts
• Fits the AMPS base, device holders, and the swiveling top plate
• Includes: 4 screws / 4 lock nuts

Standard website promos do not apply to this item.

• M3 x 14MM Machine Screw
• Torx TX10 Head
• Used in both the USB Cable Clip and Power Cable Clips