Mounting Adapter Plates

• Extend your holder from your car mount or any flat surface
• This Block Spacer will extend your device holder 25 mm (1 inch) from the car mount.
• Dimensions: 42x50x25 mm (1.65x1.97x1 In.)

• Designed for the Crown Work Assist Pipe Clamp
• Converts the clamp to an AMPS Interface
• Recessed holes enable flush mounting.

• Attaches to any existing VESA 75mm or 100mm mounting system
• Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders
• 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely
• 5 mm Diameter Holes accommodate up to M5 screws

• Attaches to any existing VESA 75 mount
• Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders
• Four pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely
• 5mm Diameter Holes

• Reduce vibration in your mounted device
• Steel Plates set in Heat Formed Rubber
• Supports AMPS 4 Hole Pattern
• Threaded M4 Holes for Installation
• For Devices Not Wider or Taller than 6"
• Not Designed for Tablets or Larger Devices

• Reduce vibration in your mounted device
• Supports AMPS and VESA75 Hole Pattern
• Steel Plates set in Heat Formed Rubber
• Threaded M4 Holes for Installation
• Designed for Vibrations above 100 Hz (100 Times a Second)
• Maximum supported weight: 15 Lbs. (6.8 Kg)

• Extension plate allows an additional device holder to be added
• Multiple Locations for AMPS hole pattern mounts
• Made from durable steel
• 7.28 in (18.5 cm) x 2.36 in (6 cm) x .12 in (3 mm)

• Extension plate allows an additional device holder to be added
• Multiple Locations for AMPS hole pattern mounts
• Made from durable steel
• 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)

• Provides a strong mounting platform
• Strong Metal Construction

Keep your device conveniently within reach with the Magnetic Adapter for OtterBox uniVERSE from ProClip USA. Quickly dock or undock your tablet with a sturdy magnetic mount.

• Attaches to 75mm existing VESA systems
• Made in Sweden from Durable Machined Aluminum
• 4 - Pre-drilled and 4mm threaded AMPS pattern holes to easily attach ProClip products

• Attaches to 75mm and 100mm existing VESA systems
• Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products

• The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
• Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
• 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely

• The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
• Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
• 4 integrated AMPS pattern brass nuts to attach ProClip holders more securely

• Adds an additional 15 degrees of angle to your mounting surface
• Can be attached between a mount and a holder
• Heavy Duty Aluminum design for heavy devices
• Includes M4 thread AMPS pattern in vertical and horizontal position
• M4 through holes allow mounting to pedestals, wall mounts, and more.