Choose your country.
Our product information is specific to your location.
We believe you are visiting us from:
United States
This will automatically be set as your ship-to country if you take no action to change it.
We believe you are visiting us from:
United States
No, select a different country
This will automatically be set as your ship-to country if you take no action to change it.
DC power convertor converter. Typically used in forklifts or other 48V vehicles to step voltage down for mobile device use. Can handle any input voltage from 18 volt to 55 volt.
Features:
- For installation into vehicle power supply
- Works with forklifts and other vehicles that use a 48 volt power system
- Converts 60V, 48V, 36V, 24V, and 18V systems to 12V
- 36W continous output
Technical Specifications:
- Input Voltage: 48Vdc nominal (18V to 55V)
- Output Voltage: 13.6Vdc +/-10%
- Continuous Current Rating: 13.6V at 3A
- Intermittent Current Rating: 13.6V at 6A for a maximum of 2 minutes followed by 8 minute rest
- Transient Voltage Protection: Meets ISO7637-2 International Standard for 24Vdc Commercial Vehicles
- Electro Static Voltage Protection: Meets ISO10605, ISO14982, >8kV contact, 15kV discharge
- Output Noise: <50mV pk-pk at continuous load
- Off load current (quiescent current): <30mA. If connected to the battery, but not powering any equipment
- Power Conversion Efficiency: Typically 80%
- Operating Temperature: -25°C to +30°C to meet these specs. +30°C to +80°C de-rate linearly to 0A
- Storage Temperature: -25°C to +100°C
- Operating Humidity: 95% non-condensing
- Case: Anodized Aluminum Dust, water and impact resistance IP533
- Weight and Dimensions: Weight: 405g Dimensions 90 (L) x 87 (W) x 50 (H) mm
| Make | Model |
|---|---|
| Zebra | ET50 10.1 |
| Zebra | ET50 10.1 |
| Zebra | ET50 8.3 |
| Zebra | ET50 8.3 |
| Zebra | ET55 10.1 |
| Zebra | ET55 10.1 |
| Zebra | ET55 8.3 |
| Zebra | ET55 8.3 |
- © 2019 ProClip USA, Inc. All rights reserved.
- Ecommerce Website Development by Acumium by Acumium