Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship-to country
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Accessories

Various accessories to enhance your ProClip pedestal mount can be found here. Including angled heads, swiveling plates, and locking move clips.

The Heavy Duty Locking Move Clip should be used in a commercial setting or with a particularly heavy device. It allows for easy use of different holders since you can switch in only matter of seconds.

Click the "View Options" button to select the Move Clip that meets your requirements

  • Allows you to switch device holders without changing the mount
  • Fits all ProClip device holders with tilt swivel or male adapter block
  • Three styles to choose from
$16.99 USD - $19.99 USD
Item 215677

Perfect for use with all types of forklifts. Keep everything in plain sight when you need it and out of the way when you don't. Attach a custom ProClip device holder directly to the face plate or add a ProClip Pedestal Mount for even more flexibility.

  • Works perfectly on the roll bar of a forklift
  • The forklift mount can be mounted on square surfaces
  • Multiple sets of AMPS holes makes the fitting of a ProClip Pedestal base easy
  • Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm

$99.99 USD
Item 215522
When mounting a pedestal to a weaker surface this base plate can be used to create a stronger installation.
  • Round base is 100 mm in diameter (3.9 in)
  • Supports heavy devices
  • Create your own solution
$19.99 USD
Item 215807
This base will give the stability needed to use the pedestal as part of a free-standing solution.
  • Round base is 200 mm in diameter (7.9 in)
  • Supports heavy devices
  • Create your own solution
$24.99 USD
Item 241419
Effectively reinforce your dashboard or other marginal device mount location with this strong pre-drilled metal plate.

  • Reinforce Dashboard for Mobile Device Mounting
  • Strong Metal Construction
  • Pre-Drilled Threaded AMPS Holes
  • Includes: Four M4 screws (20mm thread length) and lock washers

$14.99 USD
Item 215798
Effectively reinforce your dashboard or other marginal device mount location with this strong pre-drilled metal plate.

  • Reinforce Dashboard for Mobile Device Mounting
  • Strong Metal Construction
  • Pre-Drilled Threaded AMPS Holes
  • Includes: Four M5 screws (20mm thread length) and lock washers

$24.99 USD
Item 215521
The swivel base can be added to any ProClip Pedestal mount. This allows the attached device holder to be turned to face different users.
  • Perfect for installing any equipment that needs to be seen by multiple users
  • Swivels 340 degrees
  • AMPS hole pattern
$79.99 USD
Item 215524
The ProClip Angled Head can be used when a device needs to be more upright. It can also be used to mount two different holders on one pedestal.
  • Perfect for installing equipment at a 10 degree or 20 degree angle
  • Can be used for installing two devices, one on each side
$39.99 USD

Perfect for use in on all types of fork lifts. Keeps everything in plain sight when you need it and out of the way when you don't. Attach a Device holder for your device to the face plate and you are all set to go.

Click the "View Options" button to select the Mount that meets your requirements

  • Two different sizes available for different posts
  • Very strong construction
  • Supports heavy devices
  • Provides a firm installation
  • Create your own solution
$89.99 USD

The 3 Way Heavy Duty Swivel Mount attaches to any ProClip Super-Duty pedestal base or rod. This mount attachment rotates horizontally and vertically as well as swivels from left to right. Allows the attachment of compatible device holders, and lets them swivel freely when required.

Click the "View Options" button to select the Swivel Mount that meets your requirements

  • Attaches to any ProClip Super-Duty pedestal base or rod
  • Easily lock swivel in place with hand levers
  • Rotates horizontally
  • Rotates vertically
  • Swivels from left to right
$249.99 USD
Item 215988
This adapter attaches to any existing VESA 75 system and converts to AMPS. Allowing you to mount a VESA device to a ProClip Pedestal Mount
  • Attach to 75mm existing VESA systems
  • Made in Sweden from Durable Machined Aluminum
  • 4 - Pre-drilled and 4mm threaded AMPS pattern holes to easily attach ProClip products
$24.99 USD
Item 215987
This adapter attaches to any existing VESA 75 or VESA 100 system and converts to AMPS. Allowing you to mount a VESA device to a ProClip Pedestal Mount
  • Attach to 75mm and 100mm existing VESA systems
  • Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
$24.99 USD

The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.

For VESA devices a ProClip aluminum pedestal is recommended. NOT for use with ProClip vehicle specific mounts.

Please note: This item does not come with mounting screws. Bolts or screws for mounting will need to be obtained separately.

  • The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
  • Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
$15.99 USD - $19.99 USD