Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Accessories

Go to Heavy Duty Tilt-Swivel
Item 215500

DOES NOT work with adjustable phone holders

This Tilt-Swivel is made for use with holders for heavier devices.

  • For use with heavier devices e.g. tablets, bar code scanners, two-way radios, etc.
  • Tilts 15 degrees
  • Swivels 360 degrees
$19.99 USD
Go to Heavy Duty Tilt-Swivel for Adjustable Holders
Item 216009

For holders that have the adjustment screws above and below the center hole

If you have lost or broken the Tilt-Swivel on your adjustable holder this item can replace it; making your holder good as new!

  • Brass grommets for attaching to a holder with adjustable side arms
  • Tilts 15 degrees
  • Swivels 360 degrees
$19.99 USD
Go to Adapter Plate for Holders without Tilt-Swivel
Item 215527
This adapter plate is required if your holder does not have a Tilt-Swivel. The kits for holders without Tilt-Swivels (seen at the top of the page) come with this adapter as well.
$11.99 USD
Go to M8 x 20mm Hex Cap Screws with Nyloc Nuts (2 pk), Blk
Item 215535

These sturdy steel cap screws and lock nuts effectively secure the interlocking joints of our Heavy Duty and Super Duty pedestal mounts. Quick to adjust with only a 6 mm Allen Key, as the nut is securely held within the machined recess of the extension rod.

  • Use to connect pedestal extension rods to each other and to pedestal bases
  • Contents: 2 screws, 2 nuts, Allen key
  • Quick and Easy to Adjust with 6mm Allen Key provided

Standard website promos do not apply to this item.

$3.99 USD
Go to M8 x 20mm Hex Cap Screws with Nyloc Nuts (2 pk), Zinc
Item 216535

These sturdy steel cap screws and lock nuts effectively secure the interlocking joints of our Heavy Duty and Super Duty pedestal mounts. Quick to adjust with only a 6 mm Allen Key, as the nut is securely held within the machined recess of the extension rod.

  • Use to connect pedestal extension rods to each other and to pedestal bases
  • Contents: 2 screws, 2 nuts, Allen key
  • Quick and Easy to Adjust with 6mm Allen Key provided

Standard website promos do not apply to this item.

$3.99 USD
Go to 2 Piece Pedestal Mount Wing Nut Kit
Item 215670
Wing nut kit for use with ProClip aluminum pedestal mounts. Allows easy adjustment and removal of pedestal parts.
  • Wing nuts for aluminum pedestal mounts
  • Fits all extension rod sizes
  • Metal spacer for use with ProClip pedestals
  • 2 Wing Nuts / 2 Metal Spacers / 2 Bolts

Standard website promos do not apply to this item.

$9.99 USD
Go to M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Blk
Item 215591

These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

  • Use to connect device holders without Tilt-Swivel directly to pedestal mounts
  • Use to attach Move Clips
  • Pkg Contents: 4 screws, 4 nuts, Torx key

$3.99 USD
Go to iOauto Pro Magnetic Core

NOTICE: This item is the magnetic core only. It is designed to work together with the iOauto sphere. NOT for use with phones designed to detect manufacturer flip-cover cases. This is strictly because the magnet can put the phone into sleep or docking modes. Known phones with this feature are the Samsung Galaxy S4, Galaxy Mega, LG G3, Moto G, Nexus 6 and HTC One (M8 & M9). iO products will not work with MOST silicone cases/covers.

$20.00 USD
Go to Headrest Mount with Vesa Face Plate
Item 810721

Fits headrest posts: Size: (Min. inner - 123mm or 4 3/4 inch) to (Max. outer - 183mm or 7 3/16 inch)

  • Provides the perfect platform for your device in the rear seat
  • Clamps around the headrest posts
  • Average installation time is 5 minutes
$65.99 USD
Go to M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Zinc
Item 216591

These Zinc cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

  • Use to connect device holders without Tilt-Swivel directly to pedestal mounts
  • Use to attach Move Clips
  • Pkg Contents: 4 screws, 4 nuts, Torx key

$3.99 USD
Go to M4 x 12mm Hex Cap Screws with Lock Washers (4 pk), Blk
Item 215536

These black cap screws and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a 4mm brass insert, (utilized in several of our ABS Bases or Adapter Plates) or to an M4 threaded metal plate, such as our Dashboard Back Plates or VESA plates.

  • Use to attach a Tilt-Swivel Base or Pedestal Mount base to a 4mm brass insert or threaded metal plate
  • Contents: 4 screws, 4 lock washers, 3 mm Allen key
  • M4 Diameter
  • 12 mm Thread
  • 4 mm Head

Standard website promos do not apply to this item.

$3.99 USD
Go to M4 x 10mm High-Profile Cap Screws with Lock Washers (4 pk), Blk
Item SK1040

These black cap screws and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a 4mm brass insert, (utilized in several of our ABS Bases or Adapter Plates) or to an M4 threaded metal plate, such as our Dashboard Back Plates or VESA plates.

  • Use to attach a Tilt-Swivel Base or Pedestal Mount base to a 4mm brass insert or threaded metal plate
  • Contents: 4 screws, 4 lock washers, 3 mm Allen key
  • M4 Diameter
  • 10 mm Thread
  • 4 mm Head

Standard website promos do not apply to this item.

$3.99 USD
Go to M4 x 15mm Hex Cap Screw with Lock Nut (4 pk)
Item 215537
If you need to attach a device holder or a angled top plate to one of our pedestals this set of screws is a perfect fit. Includes four screws and locking nuts for a secure hold.
  • Extra screw set for aluminum pedestal mounts
  • Fits the AMPS base, device holders, and the swiveling top plate
  • Includes: 4 screws / 4 lock nuts

Standard website promos do not apply to this item.

$3.99 USD
Go to Small Pedestal Mount with Multi Angle Tilt-Swivel
Item 215421
This Small Pedestal Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 2.5 inches/ 62 mm and can be attached to any flat surface.
  • AMPS hole pattern for ProClip device holders
  • Multi angle swivel allows adjustment in all three dimensions
  • Great for use with ProClip console mounts to add height and adjustment

Standard website promos do not apply to this item.

$49.99 USD