Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Accessories

Go to Center Screw & Washer for HD Tilt-Swivel
Item 100098

If you have accidentally lost or stripped the center screw on your device holder this can replace it without buying a totally new solution.

$1.99 USD
Go to AMPS Device Mounting Adapters

For use with Devices that have a AMPS hole pattern on the back. (30 mm by 38 mm pattern) The Device Mounting Adapter accommodates the AMPS hole pattern in both landscape and portrait.

  • Can be used to mount devices that use the AMPS hole pattern
  • Keeps your device safely at hand
  • Easily remove device from mounting position
  • Can be attached to any ProClip vehicle mount or flat surface
$8.99 USD - $16.99 USD
Go to Otter + Pop Symmetry for iPhone 11 Pro Max
Item 100587

Get a stylish and sleek, yet protective phone case with the OtterBox Symmetry. This slim case offers protection for your day-to-day adventures and has a built-in PopSocket.

$60.95 USD
Go to OtterBox Symmetry Clear for iPhone 11 Pro
Item 100595

Get a stylish and sleek, yet protective phone case with the OtterBox Symmetry. This slim case offers protection for your day-to-day adventures. The slim profile showcases the design of your phone and the clear back highlights your phone’s stylish color.

$49.95 USD
Go to Angled Extension Plate (Thick)
Item 215413

Please note: Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.

Extend your device upwards from the Vehicle Console Mount for better viewing! Thick version for heavier devices.

  • Extend your Device upwards from your Vehicle Console Mount
  • Extra thick material for heavy devices
  • Can be mounted directly to the Vehicle Mount or to a Tilt-Swivel Mount
$15.99 USD
Go to Suction Cup Dashboard Disc
Item 100643
The ProClip Suction Cup Dashboard Disc will allow you to attach your suction cup directly to your Vehicle Mount.
  • 80 mm (3.15 in) diameter
  • Flat surface for suction cup attachment
  • 3M adhesive tape to attach to a flat surface
$5.99 USD
Go to Side Arm Screw 2-Pack for Adjustable Holders
Item 100099

These black Philips machine screws normally secure the arms of our adjustable phone holders. If you have lost one or both of the adjustment screws from your holder this kit will replace them.

$1.99 USD
Go to OtterBox Symmetry Clear for iPhone 11 Pro Max
Item 100589

Get a stylish and sleek, yet protective phone case with the OtterBox Symmetry. This slim case offers protection for your day-to-day adventures. The slim profile showcases the design of your phone and the clear back highlights your phone's stylish color.

$49.95 USD
Go to Single-T Mounting Adapter with Tilt-Swivel
Item 215231

This adapter plate has 1 "T" shaped prong extending out from the base plate. Fits many devices with "Single-T" slots.

  • 1 Prong / Single T Male Adapter
  • Includes Tilt-Swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
  • Comes with 4 self-tapping screws
$19.99 USD
Go to Single-T Mounting Adapter
Item 215225

This adapter plate has 1 "T" shaped prong extending out from the base plate. Fits many devices with "Single-T" slots.

  • 1 Prong / Single-T Male Adapter
  • Works with any mount that utilizes the AMPS hole pattern
  • Comes with 4 self-tapping screws
$14.99 USD
Go to Ball Mount Adapter Plate
Item 215547
Ball Mount Adapter Plate (17 MM diameter) for use with navigation and other devices/device cradles that use the ball mounting system - usually attached to a windshield suction mount.
  • Custom made ball to fit with your device/device cradle
  • AMPS hole pattern for use with ProClip vehicle mounts or any AMPS base
  • Easily remove device from ball and switch between ProClip mount and original suction cup
$29.99 USD
Go to ProClip Plastic VESA Adapter Plates

The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.

For VESA devices a ProClip aluminum pedestal is recommended. NOT for use with ProClip vehicle specific mounts.

Please note: This item does not come with mounting screws. Bolts or screws for mounting will need to be obtained separately.

  • The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
  • Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
$15.99 USD - $24.99 USD
Go to 4 Prong (Richter) Mounts

For use with devices/device cradles that use the Richter mounting system - usually attached to a windshield suction cup mount. The Richter system has 4 pins extending out from the plate.

  • 4 Prong / Richter Adapter
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
$9.99 USD - $34.99 USD
Go to MultiStand Arm for Tablet Holders

This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

Requires ProClip Tablet Holder, Sold Separately

  • Choose the correct size from the drop down box
  • Works with holders for tablets sized 7 to 12 inches
  • Converts a basic tablet holder into a MultiStand (Tablet holder sold separately)
  • Adjustable stand for many angles of viewing
  • Made for table/desktop use with rubber non-slip feet
$19.99 USD - $29.99 USD
Go to Monitor Mount for Vertical Slot Attachment
Item 213032
For use with monitors that have a vertical slot in back. The Monitor slides down onto the mount.
  • Easy self install
  • Simply attach in seconds
  • When used with a ProClip vehicle mount; no interior damage or drilling of holes
  • No special tools required
$34.99 USD
Go to Monitor Mount for Thumb Screw Attachment
Item 213069
For use with monitors that have a mounting screw hole on the bottom. The Monitor is attached to the mount by lining up the monitor screw hole with the thumbscrew. Then tighten the thumbscrew and the Monitor is securely attached.
  • Easy self install
  • Simply attach in seconds
  • When used with a ProClip vehicle mount; no interior damage or drilling of holes
  • No special tools required
$34.99 USD