Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship-to country
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship-to country
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Accessories

For use with Devices that have a AMPS hole pattern on the back. (30 mm by 38 mm pattern) The Device Mounting Adapter accommodates the AMPS hole pattern in both landscape and portrait.

  • Can be used to mount devices that use the AMPS hole pattern
  • Keeps your device safely at hand
  • Easily remove device from mounting position
  • Can be attached to any ProClip vehicle mount or flat surface
$8.99 USD - $16.99 USD
Item 215413
Extend your device upwards from the Vehicle Console Mount for better viewing! Thick version for heavier devices.

Please note: Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.

  • Extend your Device upwards from your Vehicle Console Mount
  • Extra thick material for heavy devices
  • Can be mounted directly to the Vehicle Mount or to a Tilt-Swivel Mount
$15.99 USD
Item 100643
The ProClip Suction Cup Dashboard Disc will allow you to attach your suction cup directly to your Vehicle Mount.
  • 80 mm (3.15 in) diameter
  • Flat surface for suction cup attachment
  • 3M adhesive tape to attach to a flat surface
$5.99 USD
Item 215527
This adapter plate is required if your holder does not have a Tilt-Swivel. The kits for holders without Tilt-Swivels (seen at the top of the page) come with this adapter as well.
$11.99 USD

The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.

For VESA devices a ProClip aluminum pedestal is recommended. NOT for use with ProClip vehicle specific mounts.

Please note: This item does not come with mounting screws. Bolts or screws for mounting will need to be obtained separately.

  • The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
  • Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
$15.99 USD - $19.99 USD
Item 100356

Not for use with wireless chargers.

Accessorize and decorate your device with custom iOmounts skins! These skins feature unique iOmounts designs and will not leave a permanent adhesive residue on your device.

  • iOskins provide a perfect surface on which to mount your iOadapt
  • Protect your device from the permanent iOadapt adhesive
  • iOskins feature unique iOmounts designs and will not leave a permanent adhesive residue on your device
$6.00 USD
Item 215501
This Tilt-Swivel adapter plate may be required if your Tilt-Swivel is too loose. Holders with older design Tilt-Swivels will require this adapter.
$2.99 USD
Item 215231

This adapter plate has 1 "T" shaped prong extending out from the base plate. Fits many devices with "Single-T" slots.

  • 1 Prong / Single T Male Adapter
  • Includes Tilt-Swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
  • Comes with 4 self-tapping screws
$19.99 USD
Item 215225

This adapter plate has 1 "T" shaped prong extending out from the base plate. Fits many devices with "Single-T" slots.

  • 1 Prong / Single-T Male Adapter
  • Works with any mount that utilizes the AMPS hole pattern
  • Comes with 4 self-tapping screws
$14.99 USD
Item 215547
Ball Mount Adapter Plate (17 MM diameter) for use with navigation and other devices/device cradles that use the ball mounting system - usually attached to a windshield suction mount.
  • Custom made ball to fit with your device/device cradle
  • AMPS hole pattern for use with ProClip vehicle mounts or any AMPS base
  • Easily remove device from ball and switch between ProClip mount and original suction cup
$29.99 USD

For use with devices/device cradles that use the Richter mounting system - usually attached to a windshield suction cup mount. The Richter system has 4 pins extending out from the plate.

  • 4 Prong / Richter Adapter
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
$9.99 USD - $34.99 USD

This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

Requires ProClip Tablet Holder, Sold Separately

  • Choose the correct size from the drop down box
  • Works with holders for tablets sized 7 to 12 inches
  • Converts a basic tablet holder into a MultiStand (Tablet holder sold separately)
  • Adjustable stand for many angles of viewing
  • Made for table/desktop use with rubber non-slip feet
$19.99 USD
Item 213032
For use with monitors that have a vertical slot in back. The Monitor slides down onto the mount.
  • Easy self install
  • Simply attach in seconds
  • When used with a ProClip vehicle mount; no interior damage or drilling of holes
  • No special tools required
$34.99 USD
Item 213069
For use with monitors that have a mounting screw hole on the bottom. The Monitor is attached to the mount by lining up the monitor screw hole with the thumbscrew. Then tighten the thumbscrew and the Monitor is securely attached.
  • Easy self install
  • Simply attach in seconds
  • When used with a ProClip vehicle mount; no interior damage or drilling of holes
  • No special tools required
$34.99 USD
Item 215500
This Tilt-Swivel is made for use with holders for heavier devices.
  • For use with heavier devices e.g. tablets, bar code scanners, two-way radios, etc.
  • Tilts 15 degrees
  • Swivels 360 degrees
$19.99 USD
Item 216009
If you have lost or broken the Tilt-Swivel on your adjustable holder this item can replace it; making your holder good as new!
  • Brass grommets for attaching to a holder with adjustable side arms
  • Tilts 15 degrees
  • Swivels 360 degrees
$19.99 USD