Choose your country.
Our product information is specific to your location.
We believe you are visiting us from:
This will automatically be set as your ship-to country if you take no action to change it.
-
MENU -
0
We believe you are visiting us from:
This will automatically be set as your ship-to country if you take no action to change it.
Accessories
PLEASE NOTE: If you have a Samsung Galaxy S9 or S9+ this will NOT work for you! You will need item number 100366 instead.
This set of MagicPlates is for the MagicMount Pro Charge. If you have a second phone or just need a spare set of plates this will accommodate you. The pack includes one plate for a phone without case and one for a phone with case.
- Plates easily attach with the included guide
- Strong adhesive adheres to most devices or cases (slick silicone cases may not work)
- Includes 2 MagicPlates, 1 for bare phone; 1 for phone with case
PLEASE NOTE: This pack is for the Samsung Galaxy S9 or S9+.
If you have a different phone you will need item number 100365 instead.
This set of MagicPlates is for the MagicMount Pro Charge. If you have a second phone or just need a spare set of plates this will accommodate you. The pack includes one set of MagicPlates.
- Plates easily attach with the included guide
- Strong adhesive adheres to most devices or cases (slick silicone cases may not work)
- Includes 1 set of MagicPlates
If you already own a Scosche MagicMount Charge this is the perfect option to upgrade to a ProClip vehicle mount!
- Fits the Scosche MagicMount Charge head (sold separately)
- AMPS hole pattern for mounting on a ProClip vehicle mount (sold separately)
- Discreet design blends well with vehicle interior
Oliv Shims must be attached to the outside of any case and in the center of the device.
Not for use with wireless chargers.
The Oliv Device Shims connect with all products in the Oliv Eco-System.
- Safe for all mobile devices
- A safer way to use GPS phone navigation
- (2) adhesive shims included
Not for use with wireless chargers.
- Diameter of 32 mm (1.25 in)
- 0.64 mm thick (.025 in)
- Order extra adapts to use iOmounts with all your devices
Please note: Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
- Extend your devices to the left or right of your vehicle mount
- Avoid interference with dashboard controls
- Can be mounted directly to the vehicle mount or to a Tilt-Swivel mount
- Quick release tab for easy device removal
- Allows you to switch device holders without changing the pedestal/vehicle mount
- Fits all ProClip Device Holders with Tilt-Swivel
- Four small self-tapping screws
- Best used with a #1 Philips screwdriver
- Anodized to prevent corrosion
NOTICE: Sales of this part are final and cannot be returned or canceled once they leave our warehouse. Please consider this when ordering.
This adapter plate has 2 "T" shaped prongs extending out from the base plate. Fits many devices with the "Dual-T" slots; including the Cobb Tuning Accessport.
- 2 Prong / Dual-T Male Adapter
- Includes Tilt-Swivel to angle holder 15 degrees any direction
- Works with any mount that utilizes the AMPS hole pattern
- Comes with 4 self-tapping screws
This cigarette outlet to USB adapter allows you to keep two devices charged at the same time.
- Two standard sized USB ports
- Port 1 supports standard USB devices up to 12 watts
- Port 2 supports QuickCharge 3.0 up to 18 watts
If you are using a device with a belt clip on the back or a case with a button on the back, you can conveniently hang it in your car or on a wall using the Button and Clip Holder. The V-slot is designed to allow belt clips or holster buttons to hang on it.
- Two different size options for large and small belt-clips
- Accommodate devices, cases, or holsters that have buttons or belt clips
- Holds device securely
- Easily slide device in and out
- Can be attached to any flat surface or mounting bracket (Demo ProClip Car Mount shown in picture)
- When not in use the face plate and holder can be removed from the Friction Mount so it is easier to carry it in your luggage
- Friction material underneath the mount makes it stick to the dashboard fairly well
- May slide during sharp turns, braking and speeding
Please note: Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
- Extend your devices to the left or right of your vehicle mount
- Avoid interference with dashboard controls
- Can be mounted directly to the vehicle mount or to a Tilt-Swivel mount
- Quick release tab for easy device removal
- Allows you to switch device holders without changing the pedestal/vehicle mount
- Fits all ProClip Device Holders with tilt swivel
- Includes 2 Locking Move Clips
This adapter plate has 2 "T" shaped prongs extending out from the base plate. Fits many devices with the "Dual-T" slots; including the Cobb Tuning Accessport.
- 2 Prong / Dual-T Male Adapter
- Works with any mount that utilizes the AMPS hole pattern
- Comes with 4 self-tapping screws
These black Philips screws and lock nuts are an effective way to attach a ProClip device holder with Tilt-Swivel directly to any one of our Pedestal Mounts or any metal AMPS plate. Comes with two different lengths of screws for maximum flexibility.
- Use to connect device holders with Tilt-Swivel directly to pedestal mounts
- Pkg Contents: Four M4 x 14mm & Four M4 x 20mm screws; Four M4 Nyloc Nuts
- © 2019 ProClip USA, Inc. All rights reserved.
- Ecommerce Website Development by Acumium by Acumium