Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Lifestyle

Go to Scosche TerraClamp - Quick Release 3-in-1 Mount
Item 100382
  • Weatherproof case for phones up to 3.5 in. wide and 6.5 in. tall
  • GoPro Mount
  • 1/4"-20 Screw Mount
  • 360 Degree Adjustable Turn and Rotate
  • Fits Round Tubes up to 1.75"
$29.99 USD
Go to MagicMount Handlebar
Item 100383

Not for use with wireless chargers.

MagicMount Handlebar is here! This mount uses a combination of magnets and Elastic Bands to safely secure your device. It comes with one MagicPlate for large devices and one for small devices.

  • High Power Neodymium Magnets
  • Includes Large and Small Device Plates
  • Fits Handlebars 0.875" to 1.25"
  • Elastic Bands for Added Security
  • For best results MagicPlates should always be applied to the OUTSIDE of a case.
$29.99 USD
Go to Scosche TerraClamp - MagicMount Pro Handlebar
Item 100385

Not for use with wireless chargers.

The TerraClamp - MagicMount Pro Handlebar combines the best of TerraClamp and MagicMounts. It gives you a MagicMount attached to a 6" pedestal that can be easily attached to a handlebar.

  • Fits Handlebars 0.875" to 1.25"
  • High Power Neodymium Magnets
  • 360 Degree Adjustable Turn and Rotate
  • Includes Elastic Bands for Added Security
  • For best results MagicPlates should always be applied to the OUTSIDE of a case.
$54.99 USD
Go to Scosche TerraClamp - MagicMount Brake / Clutch
Item 100386

Not for use with wireless chargers.

The TerraClamp - MagicMount Pro Brake/Clutch combines the best of TerraClamp and MagicMounts. It gives you a MagicMount attached to a pedestal with a mount specially made for brake/clutch reservoirs.

  • Brake / Clutch Reservoir Mount
  • High Power Neodymium Magnets
  • 360 Degree Adjustable Turn and Rotate
  • Includes Elastic Bands for Added Security
  • For best results MagicPlates should always be applied to the OUTSIDE of a case.
$59.99 USD
Go to XL Table Stand
Item 216093

Keep your device within reach with the XL Table Stand from ProClip. Designed for larger devices such as tablets, this sturdy and durable table stand will hold any device up to a 10.1" tablet.

  • Holds devices up to 10.1" tablets
  • Allows for use in portrait or landscape view
  • May be permanently attached to a tabletop (extra hardware required)

Standard website promos do not apply to this item.

$74.99 USD
Go to Adjustable Top Support and Handlebar Mount with Tilt-Swivel
Item 100655
This kit includes a top support and a handle bar mount. Combine this with a ProClip device specific holder and you have a perfect solution for using your device on a set of handlebars.

Maximum phone height for use with this item is 142 mm (5.6 in). Please measure your phone to ensure a proper fit!

Fits most handlebars with a diameter of 26 mm (1 inch)

  • Top support keeps your phone in the holder even on rough roads
  • Pipe / Bar Diameter: 1 inch / 26 mm
  • Phone holder required. Sold Separately
$94.99 USD
Go to Adjustable Top Support and Handlebar Mount
Item 100656
This kit includes a top support and a handle bar mount. Combine this with a ProClip device specific holder and you have a perfect solution for using your device on a set of handlebars.

Maximum phone height for use with this item is 142 mm (5.6 in). Please measure your phone to ensure a proper fit!

Fits most handlebars or pipes with a diameter of 19 mm (3/4 in) to 30 mm (1 1/8 in)

  • Top support keeps your phone in the holder even on rough roads
  • Pipe / Bar Diameter: 1 inch / 26 mm
  • Phone holder required. Sold Separately
$84.99 USD
Go to Pipe / Handlebar Mount with Tilt-Swivel
Item 215083

The ProClip Handlebar Mount attaches securely to round handlebars. The Tilt-Swivel accommodates all ProClip Device Holders and other device holders with the AMPS Hole Pattern. 1 inch diameter when closed.

  • Pipe or bar diameter - 26mm (1 inch)
  • Attaches securely to round handlebars or any round pipe
  • The face plate accommodates all ProClip device holders and other device holders with the AMPS hole pattern

Standard website promos do not apply to this item.

$69.99 USD
Go to Pipe / Handlebar Mount with Tilt-Swivel
Item 215342
The ProClip Handlebar Mount attaches securely to round handlebars. The Tilt-Swivel accommodates all ProClip Device Holders and other device holders with the AMPS Hole Pattern. 1.25 inches / 3.18 cm diameter when closed.
  • Pipe or bar diameter - 31mm (1.25 inch)
  • Attaches securely to round handlebars or any round pipe
  • The face plate accommodates all ProClip device holders and other device holders with the AMPS hole pattern

Standard website promos do not apply to this item.

$69.99 USD
Go to Plastic Pipe Mount with AMPS Plate
Item 215664
For installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes.
  • Smallest diameter pipe or bar - 19mm (3/4 inch)
  • Largest diameter pipe or bar - 30mm (1 1/8 inch)
  • Mounting plate sized 50 x 42mm with pre-drilled holes

Standard website promos do not apply to this item.

$59.99 USD
Go to Pipe Mount with Mounting Plate - (Mounting Plate 160 X 50 mm)
Item 215665

For installation of devices on pipes and poles. The mount has a mounting plate sized 160x50 mm with 6 pre-drilled holes.

  • Smallest diameter pipe or bar - 19mm (3/4 inch)
  • Largest diameter pipe or bar - 30mm (1 1/8 inch)

Standard website promos do not apply to this item.

$69.99 USD
Go to Pipe Mount With 45 Degree Mounting Plate - (Mounting Plate 160 X 50 mm)
Item 215666
For installation of devices on pipes and poles. The mount has a 45 degree mounting plate sized 160x50 mm with 6 pre-drilled holes.

  • Smallest diameter pipe or bar - 19mm (3/4 inch)
  • Largest diameter pipe or bar - 30mm (1 1/8 inch)

Standard website promos do not apply to this item.

$69.99 USD
Go to Pipe Mount With 90 Degree Mounting Plate - (Mounting Plate 160 X 50 mm)
Item 215667
For installation of devices on pipes and poles. The mount has a 90 degree mounting plate sized 160x50 mm with 6 pre-drilled holes.

  • Smallest diameter pipe or bar - 19mm (3/4 inch)
  • Largest diameter pipe or bar - 30mm (1 1/8 inch)

Standard website promos do not apply to this item.

$69.99 USD
Go to Pipe Clamp with Adjustable Mounting Plate
Item 215792

Fits round and oblong bars: 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)

WARNING: This item does not come with fasteners. Only ProClip tablet and mobile computing holders include proper screws. If you plan to use a ProClip phone holder on this mount screws will need to be obtained separately.

For installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc.
  • Made of high grade plastics
  • Includes adjustable pedestal for maximum flexibility
  • Fits round and oblong bars: 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)

Standard website promos do not apply to this item.

$49.99 USD
Go to Pipe Clamp with Fixed Mounting Plate
Item 215794

Fits round and oblong bars: 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)

For installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc.
  • Made of high grade plastics
  • Fits round and oblong bars: 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)

Standard website promos do not apply to this item.

$39.99 USD
Go to Desk Stand (New Style)
Item 215396
Keep your device within easy reach at home or in the office. Attach a ProClip device specific holder to complete your desktop solution.

Holder not included. NOT for use with tablets.

  • Keep your device within easy reach in the office
  • Attach a Device Holder for a mobile phone, or any device you want to have within easy reach
  • Also good for remote controls and chargers
$34.99 USD