Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Mounts

  • 15 Results
Go to ProClip Suction Cup Mount Kit with Locking Move Clip
Item 710647

This Travel Mount Kit is a windshield suction cup mount designed to accommodate the ProClip custom device holders (except large tablet holders) so you can easily bring your device holder when you travel. The kit allows for a quick release of the holder by using the locking move clip.

  • Designed to fit with most ProClip Device Holders (not for tablet holders)
  • Easily move holder between vehicle mount and travel mount
  • Secure suction cup that will adhere to any smooth non-porous surface
  • 3M adhesive dash mount disk for dashboard or console attachment
$29.99 USD
Go to Suction Cup Dashboard Disc
Item 100643
The ProClip Suction Cup Dashboard Disc will allow you to attach your suction cup directly to your Vehicle Mount.
  • 80 mm (3.15 in) diameter
  • Flat surface for suction cup attachment
  • 3M adhesive tape to attach to a flat surface
$5.99 USD
Go to ProClip Adjustable Headrest Mount - Small
Item 811010

The headrest mount clamps around the headrest posts and the face plate has pre-drilled holes which makes the attachment of a holder easy. Device specific holder sold separately.

  • Clamps around the headrest posts
  • Minimum inner length - 3.75 inches (95 mm)
  • Maximum outer length - 6 inches (155 mm)
$59.99 USD
Go to ProClip Adjustable Headrest Mount - Medium
Item 811020

The headrest mount clamps around the headrest posts and the face plate has pre-drilled holes which makes the attachment of a holder easy. Device specific holder sold separately.

  • Clamps around the headrest posts
  • Minimum inner length - 4.75 inches (123 mm)
  • Maximum outer length - 7.19 inches (183 mm)
$59.99 USD
Go to ProClip Adjustable Headrest Mount - Large
Item 811030

The headrest mount clamps around the headrest posts and the face plate has pre-drilled holes which makes the attachment of a holder easy. Device specific holder sold separately.

  • Clamps around the headrest posts
  • Minimum inner length - 5.88 inches (151 mm)
  • Maximum outer length - 8.25 inches (211 mm)
$59.99 USD
Go to 6 Inch Universal Suction Cup Mount
Item 202017

WARNING: This item does not come with fasteners. Only ProClip tablet and mobile computing holders include proper screws. If you plan to use a ProClip phone holder on this mount screws will need to be obtained separately.

  • Strong construction
  • 360 Degree swivel
  • Provides a firm installation
  • AMPS hole pattern for mounting
  • Standard website promos do not apply to this item.

$52.99 USD
Go to 7.5 Inch Universal Suction Cup Mount
Item 202011

WARNING: This item does not come with fasteners. Only ProClip tablet and mobile computing holders include proper screws. If you plan to use a ProClip phone holder on this mount screws will need to be obtained separately.

  • Strong construction
  • 360 Degree swivel
  • Provides a firm installation
  • AMPS hole pattern for mounting

Standard website promos do not apply to this item.

$59.99 USD
Go to Adjustable Console Mount
Item 830510

Adjustable from: 56 to 84 mm (2.3 to 3.3 in). For flat (non-curved) console sidewalls.

Note: This is a General Photo. Your console might look different.

Notice: Consider how the device, or horizontal position, will fit the location and could interfere with other vehicle functions.

The Adjustable Console Mount fits a variety of vehicle floor consoles. It attaches onto the sidewall of the center floor console.

To select the correct size for the adjustable console mount; measure from the top of your center console down to the carpet. Then match that measurement to our listed length options.

$29.99 USD
Go to Adjustable Console Mount
Item 830520

Adjustable from: 85 to 131 mm (3.4 to 5.1 in). For flat (non-curved) console sidewalls.

Note: This is a General Photo. Your console might look different.

Notice: Consider how the device, or horizontal position, will fit the location and could interfere with other vehicle functions.

The Adjustable Console Mount fits a variety of vehicle floor consoles. It attaches onto the sidewall of the center floor console.

To select the correct size for the adjustable console mount; measure from the top of your center console down to the carpet. Then match that measurement to our listed length options.

$29.99 USD
Go to Adjustable Console Mount
Item 830530

Adjustable from: 132 to 181 mm (5.2 to 7.1 in). For flat (non-curved) console sidewalls.

Note: This is a General Photo. Your console might look different.

Notice: Consider how the device, or horizontal position, will fit the location and could interfere with other vehicle functions.

The Adjustable Console Mount fits a variety of vehicle floor consoles. It attaches onto the sidewall of the center floor console.

To select the correct size for the adjustable console mount; measure from the top of your center console down to the carpet. Then match that measurement to our listed length options.

$29.99 USD
Go to 11 Inch Universal Suction Cup Mount
Item 202012

WARNING: This item does not come with fasteners. Only ProClip tablet and mobile computing holders include proper screws. If you plan to use a ProClip phone holder on this mount screws will need to be obtained separately.

  • Strong construction
  • 360 Degree swivel
  • Provides a firm installation
  • AMPS hole pattern for mounting

Standard website promos do not apply to this item.

$64.99 USD
Go to Adjustable Console Mount
Item 830540

Adjustable from: 182 to 231 mm (7.1 to 9.09 in). For flat (non-curved) console sidewalls.

Note: This is a General Photo. Your console might look different.

Notice: Consider how the device, or horizontal position, will fit the location and could interfere with other vehicle functions.

The Adjustable Console Mount fits a variety of vehicle floor consoles. It attaches onto the sidewall of the center floor console.

To select the correct size for the adjustable console mount; measure from the top of your center console down to the carpet. Then match that measurement to our listed length options.

$29.99 USD
Go to Adjustable Console Mount
Item 830550

Adjustable from: 232 to 280 mm (9.1 to 11.02 in). For flat (non-curved) console sidewalls.

Note: This is a General Photo. Your console might look different.

Notice: Consider how the device, or horizontal position, will fit the location and could interfere with other vehicle functions.

The Adjustable Console Mount fits a variety of vehicle floor consoles. It attaches onto the sidewall of the center floor console.

To select the correct size for the adjustable console mount: measure from the top of your center console down to the carpet. Then match that measurement to our listed length options.

$29.99 USD
Go to 6.5 Inch Universal Pedestal Cup Holder Mount
Item 202019

WARNING: This item does not come with fasteners. Only ProClip tablet and mobile computing holders include proper screws. If you plan to use a ProClip phone holder on this mount screws will need to be obtained separately.

  • Strong construction
  • 360 Degree swivel
  • Fits standard vehicle cup holders
  • AMPS hole pattern for mounting

Standard website promos do not apply to this item.

$69.99 USD
Go to 10.5 Inch Universal Pedestal Cup Holder Mount
Item 202018

WARNING: This item does not come with fasteners. Only ProClip tablet and mobile computing holders include proper screws. If you plan to use a ProClip phone holder on this mount screws will need to be obtained separately.

  • Strong construction
  • 360 Degree swivel
  • Fits standard vehicle cup holders
  • AMPS hole pattern for mounting

Standard website promos do not apply to this item.

$69.99 USD
  • 15 Results