Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Accessories

Various accessories to enhance your ProClip pedestal mount can be found here. Including angled heads, swiveling plates, and locking move clips.

Go to ProClip Plastic VESA Adapter Plates

The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.

For VESA devices a ProClip aluminum pedestal is recommended. NOT for use with ProClip vehicle specific mounts.

Please note: This item does not come with mounting screws. Bolts or screws for mounting will need to be obtained separately.

  • The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
  • Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
$15.99 USD - $24.99 USD
Go to Quick Release Docks

The Quick Release Docks should be used in a commercial setting or with a particularly heavy device. It allows for easy use of different holders since you can switch in only matter of seconds.

Click the "View Options" button to select the Quick Release Docks that meets your requirements

  • Allows you to switch device holders without changing the mount
  • Fits all ProClip device holders with Tilt-Swivel or male adapter block
  • Three styles to choose from
$16.99 USD - $19.99 USD
Go to 4 Inch Round Base Plate
Item 215522
When mounting a pedestal to a weaker surface this base plate can be used to create a stronger installation.
  • Round base is 100 mm in diameter (3.9 in)
  • Supports heavy devices
  • Create your own solution
$19.99 USD
Go to Pedestal Mount Round Base Plate - 8 Inch
Item 215807
This base will give the stability needed to use the pedestal as part of a free-standing solution.
  • Round base is 200 mm in diameter (7.9 in)
  • Supports heavy devices
  • Create your own solution
$24.99 USD
Go to AMPS Back Plate - Silver
Item 100370
Effectively reinforce your dashboard or other marginal device mount location with this strong pre-drilled metal plate.
  • Reinforce Dashboard for Mobile Device Mounting
  • Strong Metal Construction
  • Pre-Drilled AMPS Holes
  • Includes: Four M5 & four M4 screws - 25 mm (1 in) thread length - with Nyloc nuts
$7.99 USD
Go to Black Backing Plate, 4mm AMPS
Item 241419
Effectively reinforce your dashboard or other marginal device mount location with this strong pre-drilled metal plate.

  • Reinforce Dashboard for Mobile Device Mounting
  • Strong Metal Construction
  • Pre-Drilled Threaded AMPS Holes
  • Includes: Four M4 screws (20mm thread length) and lock washers

$19.99 USD
Go to Black Backing Plate, 5mm AMPS
Item 215798
Effectively reinforce your dashboard or other marginal device mount location with this strong pre-drilled metal plate.

  • Reinforce Dashboard for Mobile Device Mounting
  • Strong Metal Construction
  • Pre-Drilled Threaded AMPS Holes
  • Includes: Four M5 screws (20mm thread length) and lock washers

$24.99 USD
Go to Swivel Base
Item 215521
The swivel base can be added to any ProClip Pedestal mount. This allows the attached device holder to be turned to face different users.
  • Perfect for installing any equipment that needs to be seen by multiple users
  • Swivels 340 degrees
  • AMPS hole pattern
$89.99 USD
Go to Angled Head
Item 215524
The ProClip Angled Head can be used when a device needs to be more upright. It can also be used to mount two different holders on one pedestal.
  • Perfect for installing equipment at a 10 degree or 20 degree angle
  • Can be used for installing two devices, one on each side
$39.99 USD
Go to U-Mounts

Perfect for use in on all types of fork lifts. Keeps everything in plain sight when you need it and out of the way when you don't. Attach a Device holder for your device to the face plate and you are all set to go.

Click the "View Options" button to select the Mount that meets your requirements

  • Two different sizes available for different posts
  • Very strong construction
  • Supports heavy devices
  • Provides a firm installation
  • Create your own solution
$89.99 USD
Go to Keyboard and Tablet Mount Plate - AMPS, VESA 75/100, Keyboard Support
Item 241372
  • Adjustable keyboard tray with AMPS holes for various keyboards
  • Can be used with most ProClip tablet holders
  • Multiple AMPS hole patterns and VESA 75 & 100 for easy mounting
$129.99 USD
Go to Keyboard and Tablet Mount Plate - for Motion F5/H5 with Keyboard
Item 246520

This keyboard mount is ONLY for the Motion F5/H5

  • Adjustable keyboard tray for various keyboards
  • Can be used with most ProClip tablet holders
  • Allows the attachment of Motion F5/H5 and keyboard
  • Multiple AMPS and VESA 75 hole patterns for easy mounting
$119.99 USD
Go to VESA 75 to M4 AMPS - Aluminum Adapter Plate
Item 215988
This adapter attaches to any existing VESA 75 system and converts to AMPS. Allowing you to mount a VESA device to a ProClip Pedestal Mount
  • Attach to 75mm existing VESA systems
  • Made in Sweden from Durable Machined Aluminum
  • 4 - Pre-drilled and 4mm threaded AMPS pattern holes to easily attach ProClip products
$24.99 USD
Go to VESA 75-100 to M4 AMPS - Aluminum Adapter Plate
Item 215987
This adapter attaches to any existing VESA 75 or VESA 100 system and converts to AMPS. Allowing you to mount a VESA device to a ProClip Pedestal Mount
  • Attach to 75mm and 100mm existing VESA systems
  • Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
$27.99 USD
Go to Heavy-Duty Pivot Mount
Item 215717
Designed to attach a ProClip Tilt Swivel with self-tapping screws.
  • 180 degree pivoting head for mounting ProClip device holders
  • AMPS hole pattern on both head and base to allow use with ProClip pedestals or any product that uses the AMPS hole pattern
  • Easily accessible thumb lever allows you to lock pivot in place
$89.99 USD
Go to Heavy-Duty Pivot Mount - M4 Diameter
Item 215741
Designed to attach a ProClip cradle or holder directly. Recommended for Forklifts and high vibration mounting.

Hole diameter fits M4 Machine Screws.

Recommended for Forklifts and high vibration environments.

  • 180 degree pivoting head for mounting ProClip device holders
  • AMPS hole pattern on both head and base to allow use with ProClip pedestals or any product that uses the AMPS hole pattern
  • Easily accessible thumb lever allows you to lock pivot in place
$79.99 USD