Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Accessories

Go to 8 Inch Hood for Rain and Sun Protection
Item 216159
  • Fit Tough Sleeves and Holders for Tablets 8 1/2 Inches and smaller
  • AMPS and VESA 75 Mounting Holes
  • Recommended with ProClip mounts and pedestals.

Standard website promos do not apply to this item.

$59.99 USD
Go to Quick Release Dock Kit, 45 mm Release Lever
Item 241318
  • 45 mm Extended release tab for easy device removal
  • Allows you to easily remove device holders
  • Fits all ProClip Device Holders
  • Kit Includes 1 male and 1 female quick release dock

Standard website promos do not apply to this item.

$39.99 USD
Go to Quick Release Dock Kit, 15 mm Release Lever
Item 241350
  • 15 mm Extended release tab for easy device removal
  • Allows you to easily remove device holders
  • Fits all ProClip Device Holders
  • Kit Includes 1 male and 1 female Quick Release Dock
  • Includes Wall Fastener Pack
    • Four Machine Screws - M4 x 12mm with 2.5mm hex drive
    • Four Nyloc Nuts - M4 with 7mm drive
    • Four Self-Tapping Screws for ProClip Mounts - 3.5mm thread, 19mm length
    • Four Wall Anchors with Two Sets of Screws (Four 3.5 x 50mm screws & Four 3.5 x 40mm)

Standard website promos do not apply to this item.

$39.99 USD
Go to Quick Release Dock, Secure Release
Item 241319
  • Standard release tab for a cleaner look when installed
  • Allows you to easily remove device holders
  • Fits all ProClip Device Holders
  • Kit Includes 1 male and 1 Quick Release Dock

Standard website promos do not apply to this item.

$37.99 USD
Go to Universal Fastener Pack
Item 100223

These black cap screws, lock nuts, flat washers and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a pedestal, Dashboard Back Plates VESA plate or anything with M4 through holes or brass inserts.

  • Fastener pack for attaching a holder to a Quick Release Dock or ProClip Mount.
  • 4 - M4 x 10mm, 14 and 20 mm machine screws with low profile 2.5 mm Hex heads.
  • 4 - M4 Lock Nut, Flat Washer, Lock Washer
  • 1 - 2.5 Allen Wrench

Standard website promos do not apply to this item.

$3.99 USD
Go to Quick Release Power Dock for Hard-Wired Installation
Item 246656
  • Includes power harness for hard-wiring into a vehicle
  • Only for sleeves that feature the Quick Release Power Dock
  • Allows a Tough Sleeve to be moved between multiple locations
  • Keeps your device charged while also providing easy removal from the mount

Standard website promos do not apply to this item.

$69.99 USD
Go to VESA Adapter Plate Recessed Metal with AMPS Hole Pattern
Item 216042

The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new recessed mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.

Standard website promos do not apply to this item.

$35.99 USD
Go to Quick Release Dock Female with 45mm Release Lever
Item 241315
  • 45 mm Extended release tab for easy device removal
  • Allows you to easily remove device holders
  • Fits all ProClip Device Holders with male Speed Clip or Quick Release Power Dock

Standard website promos do not apply to this item.

$29.99 USD
Go to Button and Belt Clip Holder

If you are using a device with a belt clip on the back or a case with a button on the back, you can conveniently hang it in your car or on a wall using the Button and Clip Holder. The V-slot is designed to allow belt clips or holster buttons to hang on it.

  • Two different size options for large and small belt-clips
  • Accommodate devices, cases, or holsters that have buttons or belt clips
  • Holds device securely
  • Easily slide device in and out
  • Can be attached to any flat surface or mounting bracket (Demo ProClip Car Mount shown in picture)
$11.99 USD
Go to Key Lock Quick Release Power Dock for Hard-Wired Installation
Item 241337
  • Includes power harness for hard-wiring into a vehicle
  • Key lock for added security
  • Only for sleeves that feature the Quick Release Power Dock
  • Allows a Tough Sleeve to be moved between multiple locations
  • Keeps your device charged while also providing easy removal from the mount
$79.99 USD
Go to Tapping Screws, Flat Tipped, 8mm Thread, 4-pack
Item 100169
  • M2 Self-Tapping Screws
  • 8MM Long, flat tip.
  • Used for attaching quick release docks and other components to holders.

Standard website promos do not apply to this item.

$2.99 USD
Go to VESA 75 to M4 AMPS - Aluminum Adapter Plate
Item 215988
This adapter attaches to any existing VESA 75 system and converts to AMPS. Allowing you to mount a VESA device to a ProClip Pedestal Mount
  • Attach to 75mm existing VESA systems
  • Made in Sweden from Durable Machined Aluminum
  • 4 - Pre-drilled and 4mm threaded AMPS pattern holes to easily attach ProClip products

Standard website promos do not apply to this item.

$24.99 USD
Go to Quick Release Power Dock with USB Cigarette Lighter Plug
Item 241334
  • Includes USB cord with cigarette lighter adapter for charging
  • Only for sleeves that feature the Quick Release Power Dock
  • Allows a Tough Sleeve to be moved between multiple locations
  • Keeps your device charged while also providing easy removal from the mount

Standard website promos do not apply to this item.

$59.99 USD
Go to VESA 75-100 to M4 AMPS - Aluminum Adapter Plate
Item 215987
This adapter attaches to any existing VESA 75 or VESA 100 system and converts to AMPS. Allowing you to mount a VESA device to a ProClip Pedestal Mount
  • Attach to 75mm and 100mm existing VESA systems
  • Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products

Standard website promos do not apply to this item.

$27.99 USD
Go to AMPS Back Plate - Silver
Item 100370
Effectively reinforce your dashboard or other marginal device mount location with this strong pre-drilled metal plate.
  • Reinforce Dashboard for Mobile Device Mounting
  • Strong Metal Construction
  • Pre-Drilled AMPS Holes
  • Includes: Four M5 & four M4 screws - 25 mm (1 in) thread length - with Nyloc nuts
$7.99 USD
Go to Heavy Duty Aluminum 15 Degree Wedge
Item 216183
  • Adds an additional 15 degrees of angle to your mounting surface
  • Can be attached between a mount and a holder
  • Heavy Duty Aluminum design for heavy devices
  • Includes M4 thread AMPS pattern in vertical and horizontal position
  • M4 through holes allow mounting to pedestals, wall mounts, and more.
$39.99 USD