Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship-to country
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

All Items

All ProClip Items

This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

Requires ProClip Tablet Holder, Sold Separately

  • Choose the correct size from the drop down box
  • Works with holders for tablets sized 7 to 12 inches
  • Converts a basic tablet holder into a MultiStand (Tablet holder sold separately)
  • Adjustable stand for many angles of viewing
  • Made for table/desktop use with rubber non-slip feet
$19.99 USD

Extend your holder from car mount! These Block Spacers will extend your device holder in two different lengths 14 mm (0.55 in) or 19 mm (0.75 in) from the mount.

WARNING: Block Spacers do not come with screws to mount a heavy duty tilt-swivel. If you have a heavy duty tilt-swivel longer self-tapping screws will need to be purchased separately. Holders that use the heavy duty swivel include certain phone holders, tablet holders, and mobile computing holders. If you are unsure if your holder will work please contact us before ordering to confirm.

  • Two different lengths available
  • Extend your holder from your car mount or any flat surface
  • Screws for attaching the Block Spacer to the car mount are enclosed.
$12.99 USD
Item 215964
Increase the angle of your Holder an additional 15 degrees by placing this Wedge between the Holder and the Vehicle Mount.
  • Adds an additional 15 degrees of angle to your mounting surface
  • Can be attached between a mount and a holder
$11.99 USD

For use with Devices that have a AMPS hole pattern on the back. (30 mm by 38 mm pattern) The Device Mounting Adapter accommodates the AMPS hole pattern in both landscape and portrait.

  • Can be used to mount devices that use the AMPS hole pattern
  • Keeps your device safely at hand
  • Easily remove device from mounting position
  • Can be attached to any ProClip vehicle mount or flat surface
$8.99 USD - $16.99 USD

For use with devices/device cradles that use the Richter mounting system - usually attached to a windshield suction cup mount. The Richter system has 4 pins extending out from the plate.

  • 4 Prong / Richter Adapter
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
$9.99 USD - $34.99 USD
Item 84083
The Oliv Device Shims connect with all products in the Oliv Eco-System.

Oliv Shims must be attached to the outside of any case and in the center of the device.

Not for use with wireless chargers.

  • Safe for all mobile devices
  • A safer way to use GPS phone navigation
  • (2) adhesive shims included
$7.99 USD
Item 100355

Not for use with wireless chargers. Works with any smartphone, tablet, e-reader or other approved device with a solid state drive or flash memory. Older iPods and other devices with a conventional hard drive should NOT be used as the magnet could damage these devices!

  • For use with the large version of the iO Core (new version)
  • Diameter of 32 mm (1.25 in)
  • 0.64 mm thick (.025 in)
  • Order extra adapts to use iOmounts with all your devices
$8.00 USD
Item 736003
Only for device with original skin. Charges via pogo pins on side of tablet leaves USB port accessible. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.

With a neat and discreet design, and a power cable that is permanently attached this holder is the perfect option to mount your tablet.

  • Key lock for security of tablet
  • Custom fit to tablet with original skin
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Rotate between portrait and landscape view
$139.99 USD
Item 759028

This rugged, mountable tablet enclosure, we call the HD Tough Sleeve, is custom made to fit your Tab S3 9.7 and is the perfect way to protect, mount, and power your device.

  • Sliding Power Block Quick-Release Docking Interface
  • Charges via Hard-Wired Power Harness
  • Successfully Drop-Tested 6 ft to Concrete

Tough Sleeves are too heavy for standard ProClip dashboard mounts. An extra strength dashboard mount or an aluminum pedestal mount is recommended.

$199.99 USD
Item 100255

Not for use with wireless chargers. Works with any smartphone, tablet, e-reader or other approved device with a solid state drive or flash memory. Older iPods and other devices with a conventional hard drive should NOT be used as the magnet could damage these devices!

  • For use with the small version of the iO Core (older models)
  • Diameter of 25 mm (1 in)
  • 0.64 mm thick (.025 in)
  • Order extra adapts to use iOmounts with all your devices
$8.00 USD
Item 747003
Only for device with original skin. Charges via pogo pins on side of tablet leaves USB port accessible

With a neat and discreet design, and a power cable that is permanently attached this holder is the perfect option to mount your tablet.

  • Spring lock for quick release of tablet
  • Custom fit to tablet with original skin
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Rotate between portrait and landscape view
$134.99 USD
Item 754028

This rugged, mountable tablet enclosure, we call the HD Tough Sleeve, is custom made to fit your Tab S3 9.7 and is the perfect way to protect, mount, and power your device.

  • Sliding Power Block Quick-Release Docking Interface
  • Charges via Hard-Wired Power Harness
  • Successfully Drop-Tested 6 ft to Concrete
  • Key Lock for Added Security

Tough Sleeves are too heavy for standard ProClip dashboard mounts. An extra strength dashboard mount or an aluminum pedestal mount is recommended.

All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.

$219.99 USD
Item 713003
Only for device with original skin. Charges via pogo pins on side of tablet leaves USB port accessible

With a neat and discreet design, and a power cable that is permanently attached this holder is the perfect option to mount your tablet.

  • Custom fit to tablet with original skin
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Rotate between portrait and landscape view
$129.99 USD
Item 735003
Only for device with original skin. Charges via pogo pins on side of tablet leaves USB port accessible. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.

With a neat and discreet design, and a power cable that is permanently attached this holder is the perfect option to mount your tablet.

  • Key lock for security of tablet
  • Custom fit to tablet with original skin
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Rotate between portrait and landscape view
$124.99 USD
Item 746003
Only for device with original skin. Charges via pogo pins on side of tablet leaves USB port accessible.

With a neat and discreet design, and a power cable that is permanently attached this holder is the perfect option to mount your tablet.

  • Spring lock for security of tablet
  • Custom fit to tablet with original skin
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Rotate between portrait and landscape view
$119.99 USD
Item 84073
Attach the Oliv AMPS kit to any ProClip vehicle specific mount to make a perfect mounting solution for your phone and vehicle.

Oliv Shims must be attached to the outside of any case and in the center of the device.

Not for use with wireless chargers.

  • Safe for all mobile devices
  • A safer way to use GPS phone navigation
  • Tilt 42° in any direction
  • (2) adhesive shims included
$29.99 USD