Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Mounting Accessories

Go to Headrest Mount with Vesa Face Plate
Item 810721

Fits headrest posts: Size: (Min. inner - 123mm or 4 3/4 inch) to (Max. outer - 183mm or 7 3/16 inch)

  • Provides the perfect platform for your device in the rear seat
  • Clamps around the headrest posts
  • Average installation time is 5 minutes
$69.99 USD
Go to M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Zinc
Item 216591

These Zinc cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

  • Use to connect device holders without Tilt-Swivel directly to pedestal mounts
  • Use to attach Move Clips
  • Pkg Contents: 4 screws, 4 nuts, Torx key

$4.99 USD
Go to M4 x 12mm Hex Cap Screws with Lock Washers (4 pk), Blk
Item 215536

These black cap screws and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a 4mm brass insert, (utilized in several of our ABS Bases or Adapter Plates) or to an M4 threaded metal plate, such as our Dashboard Back Plates or VESA plates.

  • Use to attach a Tilt-Swivel Base or Pedestal Mount base to a 4mm brass insert or threaded metal plate
  • Contents: 4 screws, 4 lock washers, 3 mm Allen key
  • M4 Diameter
  • 12 mm Thread
  • 4 mm Head

Standard website promos do not apply to this item.

$4.99 USD
Go to M4 x 10mm High-Profile Cap Screws with Lock Washers (4 pk), Blk
Item SK1040

These black cap screws and lock washers are an effective way to secure a Tilt-Swivel Base or Pedestal Mount Base to a 4mm brass insert, (utilized in several of our ABS Bases or Adapter Plates) or to an M4 threaded metal plate, such as our Dashboard Back Plates or VESA plates.

  • Use to attach a Tilt-Swivel Base or Pedestal Mount base to a 4mm brass insert or threaded metal plate
  • Contents: 4 screws, 4 lock washers, 3 mm Allen key
  • M4 Diameter
  • 10 mm Thread
  • 4 mm Head

Standard website promos do not apply to this item.

$4.99 USD
Go to M4 x 15mm Hex Cap Screw with Lock Nut (4 pk)
Item 215537
If you need to attach a device holder or a angled top plate to one of our pedestals this set of screws is a perfect fit. Includes four screws and locking nuts for a secure hold.
  • Extra screw set for aluminum pedestal mounts
  • Fits the AMPS base, device holders, and the swiveling top plate
  • Includes: 4 screws / 4 lock nuts

Standard website promos do not apply to this item.

$4.99 USD
Go to Small Pedestal Mount with Multi Angle Tilt-Swivel
Item 215421
This Small Pedestal Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 2.5 inches/ 62 mm and can be attached to any flat surface.
  • AMPS hole pattern for ProClip device holders
  • Multi angle swivel allows adjustment in all three dimensions
  • Great for use with ProClip console mounts to add height and adjustment
$54.99 USD