Choose your country.

Our product information is specific to your location.

close menu

We believe you are visiting us from:

Ship to USA
United States

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

We believe you are visiting us from:

Ship to USA
United States
No, select a different country

This will automatically be set as your ship-to country if you take no action to change it.

Your Vehicle Not Configured Set up now Your Device Not Configured Set up now

Mounting Accessories

Go to Single-T Mounting Adapter with Tilt-Swivel
Item 215231

This adapter plate has 1 "T" shaped prong extending out from the base plate. Fits many devices with "Single-T" slots.

  • 1 Prong / Single T Male Adapter
  • Includes Tilt-Swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
  • Comes with 4 self-tapping screws
$19.99 USD
Go to Single-T Mounting Adapter
Item 215225

This adapter plate has 1 "T" shaped prong extending out from the base plate. Fits many devices with "Single-T" slots.

  • 1 Prong / Single-T Male Adapter
  • Works with any mount that utilizes the AMPS hole pattern
  • Comes with 4 self-tapping screws
$14.99 USD
Go to Ball Mount Adapter Plate for GPS and Phones
Item 215547

Ball Mount Adapter Plate (17 MM diameter) for use with navigation and other devices/device cradles that use the ball mounting system; usually attached to a windshield suction mount.

  • Universal ball size (17 MM) fits most GPS devices or cradles
  • AMPS 6-hole pattern for use with ProClip vehicle mounts or any AMPS base
  • Tight fit to keep your device upright for easy viewing
$29.99 USD
Go to ProClip Plastic VESA Adapter Plates

The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.

For VESA devices a ProClip aluminum pedestal is recommended. NOT for use with ProClip vehicle specific mounts.

Please note: This item does not come with mounting screws. Bolts or screws for mounting will need to be obtained separately.

  • The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system
  • Use to create a new flat mounting surface to allow the attachment of ProClip specific holders
$17.99 USD - $26.99 USD
Go to 4 Prong (Richter) Mounts

For use with devices/device cradles that use the Richter mounting system - usually attached to a windshield suction cup mount. The Richter system has 4 pins extending out from the plate.

  • 4 Prong / Richter Adapter
  • Includes tilt-swivel to angle holder 15 degrees any direction
  • Works with any mount that utilizes the AMPS hole pattern
$9.99 USD - $29.99 USD
Go to MultiStand Arm for Tablet Holders

This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

Requires ProClip Tablet Holder, Sold Separately

  • Choose the correct size from the drop down box
  • Works with holders for tablets sized 7 to 12 inches
  • Converts a basic tablet holder into a MultiStand (Tablet holder sold separately)
  • Adjustable stand for many angles of viewing
  • Made for table/desktop use with rubber non-slip feet
$19.99 USD - $29.99 USD
Go to Monitor Mount for Vertical Slot Attachment
Item 213032

This is a special order item. Please allow an additional 2-3 week lead time.

  • Easy self install
  • Simply attach in seconds
  • When used with a ProClip vehicle mount; no interior damage or drilling of holes
  • No special tools required
$34.99 USD
Go to Monitor Mount for Thumb Screw Attachment
Item 213069
For use with monitors that have a mounting screw hole on the bottom. The Monitor is attached to the mount by lining up the monitor screw hole with the thumbscrew. Then tighten the thumbscrew and the Monitor is securely attached.
  • Easy self install
  • Simply attach in seconds
  • When used with a ProClip vehicle mount; no interior damage or drilling of holes
  • No special tools required
$34.99 USD
Go to OtterBox USB-C Power Delivery Wall Charger
Item 102104

Power up your device with the OtterBox USB-C Power Delivery Wall Charger. Expect your device to get up and running fast with high-speed USB-C charging. Plug it in, pack it up and carry it with you to charge up anywhere.

$49.95 USD
Go to Heavy Duty Tilt-Swivel
Item 215500

DOES NOT work with adjustable phone holders

This Tilt-Swivel is made for use with holders for heavier devices.

  • For use with heavier devices e.g. tablets, bar code scanners, two-way radios, etc.
  • Tilts 15 degrees
  • Swivels 360 degrees
$19.99 USD
Go to Heavy Duty Tilt-Swivel for Adjustable Holders
Item 216009

For holders that have the adjustment screws above and below the center hole

If you have lost or broken the Tilt-Swivel on your adjustable holder this item can replace it; making your holder good as new!

  • Brass grommets for attaching to a holder with adjustable side arms
  • Tilts 15 degrees
  • Swivels 360 degrees
$19.99 USD
Go to Adapter Plate for Holders without Tilt-Swivel
Item 215527
This adapter plate is required if your holder does not have a Tilt-Swivel. The kits for holders without Tilt-Swivels (seen at the top of the page) come with this adapter as well.
$15.99 USD
Go to M8 x 20mm Hex Cap Screws with Nyloc Nuts (2 pk), Blk
Item 215535

These sturdy steel cap screws and lock nuts effectively secure the interlocking joints of our Heavy Duty and Super Duty pedestal mounts. Quick to adjust with only a 6 mm Allen Key, as the nut is securely held within the machined recess of the extension rod.

  • Use to connect pedestal extension rods to each other and to pedestal bases
  • Contents: 2 screws, 2 nuts, Allen key
  • Quick and Easy to Adjust with 6mm Allen Key provided

Standard website promos do not apply to this item.

$4.99 USD
Go to M8 x 20mm Hex Cap Screws with Nyloc Nuts (2 pk), Zinc
Item 216535

These sturdy steel cap screws and lock nuts effectively secure the interlocking joints of our Heavy Duty and Super Duty pedestal mounts. Quick to adjust with only a 6 mm Allen Key, as the nut is securely held within the machined recess of the extension rod.

  • Use to connect pedestal extension rods to each other and to pedestal bases
  • Contents: 2 screws, 2 nuts, Allen key
  • Quick and Easy to Adjust with 6mm Allen Key provided

Standard website promos do not apply to this item.

$4.99 USD
Go to 2 Piece Pedestal Mount Wing Nut Kit
Item 215670
Wing nut kit for use with ProClip aluminum pedestal mounts. Allows easy adjustment and removal of pedestal parts.
  • Wing nuts for aluminum pedestal mounts
  • Fits all extension rod sizes
  • Metal spacer for use with ProClip pedestals
  • 2 Wing Nuts / 2 Metal Spacers / 2 Bolts

Standard website promos do not apply to this item.

$9.99 USD
Go to M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Blk
Item 215591

These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Pedestal Mounts.

  • Use to connect device holders without Tilt-Swivel directly to pedestal mounts
  • Use to attach Move Clips
  • Pkg Contents: 4 screws, 4 nuts, Torx key

$4.99 USD