I've had this mount for a while now and I really love it. I use a One Plus 7 Pro and if you don't know it's a pretty big phone at 6.67' in height. The center mount is the best feature since it's not in the way while driving but still easily accessible when need for GPS, calls, etc. I hate dash/window/ac vents for that reason. It DOES work perfectly with the cupholder directly next to it. It seems like a small space but fits with no touching/rubbing. The material is plastic which gives some if you push/pull the top so strength is questionable but so far it holds up very well for normal usage. It is glued between the top and bottom piece which seems like a possible weak point but the Florida heat sitting in the sun doesn't bother it. The few Cons that I have found would be it only works towards the front of the center console not towards the rear closer to the compartment. This is due to the fact that the Titan molding is slim and widens towards the front. The glue strips won't make contact till half way forward to all the way forward. The other Con is the predrilled holes are set high on the mount. With this mount and their phone holder the top of my phone gets in the way of my hand shifting into drive. It gives about an inch or two room which isn't enough for my hand pulling the shifter down. I know it says that those holes are suggested placement which means you can drill/attach it lower but that seems to advance/too much effort for a normal person to do. Should be a second…