If you want to have two devices attached above each other, this is what you are looking for. The Vertical Extension Plate attaches to the ProClip Vehicle Mount or Tilt Swivel directly. It has several hole patterns e.g. for the ProClip standard (two holes in a center line) and the AMPS standard (Four holes in an almost square pattern) The Vertical Extension Plate is primarily designed for use with the Garmin Nuvi Ball Mount, TomTom Active Docks, Magellan 1 and 2 Prong Mounting Plates and the Richter 4 Prong Mounting Plate, which attaches at the bottom of the plate plus one other device to be attached on top of the plate. Dimensions: 155 x 50 x 5 mm / 6.10 x 1.97 x 0.19 inches.

If you want to have two devices attached above each other, this is what you are looking for. The Vertical Extension Plate attaches to the ProClip Vehicle Mount or Tilt Swivel directly. It has several hole patterns e.g. for the ProClip standard (two holes in a center line) and the AMPS standard (Four holes in an almost square pattern) The Vertical Extension Plate is primarily designed for use with the Garmin Nuvi Ball Mount, TomTom Active Docks, Magellan 1 and 2 Prong Mounting Plates and the Richter 4 Prong Mounting Plate, which attaches at the bottom of the plate plus one other device to be attached on top of the plate. Dimensions: 155 x 50 x 5 mm / 6.10 x 1.97 x 0.19 inches. Be Aware: If you put to holders for vertical devices above each other that slides up an out of the holder, the lower device will hit the upper device and can not be relesed/insrted from the holder.

Make Model ProClip Extension plates Make Model

Click here to see/print detailed installation instructions