|
Nokia N900 - Holder with Tilt Swivel
|
 |
ARE YOU A FIRST TIME CUSTOMER?Please note: You need 2 Parts to Mount Your Device on Your Dash. Part 1 - VEHICLE MOUNT, specific to your vehicle
Part 2 - DEVICE HOLDER, specific to your device, such as the one above
Together, these two parts create your mounting solution |
|
Easy to Install - See How |
|
| Item #: 511099 |
| Price: USD $34.99 |
|
|
|
Benefits |
|
- Custom fit to your device
- Holds device securely
- Keeps your device upright for better reception
- Keeps your device safely at hand
- Easily slide device in and out
- Neat and discreet design blends well with vehicle's interior
- Made of heat and cold resistant ABS plastic
- Holder can tilt 20 degrees in any direction and swivel 360 degrees
|
|
|
This Holder tilts/angles 15 degrees for optimal viewing. It is a high quality custom made holder with a neat and discreet design. It keeps your device in an upright position for better reception. Easily slide your device in/out of the holder. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device in your vehicle.
 |
Product Info |
 |
|
|
|
 |
How to Install |
 |
|
|
|
Compatibility |
|
|
|
|
|
About Our Tilt Swivel |
 The Tilt Swivel on the back of the Holder can tilt 15 degrees in any direction and swivel 360 degrees. The Tilt Swivel provides easy adjustment of your handhelds position for better viewing, and extends the Holder from the Mount by 20mm / 0.78in. You can also adjust the Holder to avoid unnecessary light reflection. (The Holder shown in the picture to the left is attached to a demo ProClip Mount) |
|
 The Tilt Swivel Base Plate on the back of the Tilt Swivel can be attached to any flat surface or mounting brackett. The base plate comes with 6 pre-drilled holes; 2 holes in a center line and 4 holes in an almost square like pattern to accommodate the AMPS hole pattern. Enclosed in the packaging are 4 self tapping screws and 4 machine screws with nuts. Dimensions of base plate: 50mm/1.96inches x 42mm/1.65inches. The 4 holes in the corners have a diameter of 4 mm, and the self tapping screw holes in the center have a diameter of 3 mm. |
|
|
Keep two devices on the same mount or use one at a time |
 If you have two devices you would like to have next to each other on your dashboard you may be able to have them on the same mount as shown in the General Picture to the left, by using our Horizontal Extension Plate.
You can also move a device/holder from car to car (mount to mount) or switch between to devices/holders on the same mount by using our Move Clip System. Please see the product category, Mounting Options, to the left to learn more about these options. |
|
Keep all your devices on the dashboard |
|
| If you have more than one device you would like to have on your dashboard, we may have the solution. Usually we have 2 or more mounts for each vehicle model so you can have all your devices securely attached on your dashboard. Many of todays customers order two or more mounts and holders - usually one for their mobile phone and one for their Handheld and/or Music Player like the General Picture below illustrates. |
|
 |
|
|
Important Notice
|
 |
You just selected a device mount/holder.
Unless you want to screw it directly into your car dashboard, you also need to order a Vehicle Mount.
The Vehicle Mount creates the platform you need for easy attachment of your device holder without damaging your dashboard. See illustration to the left.
Learn More |
| Find Your Vehicle Mount |
Important Notice
|
|
You just selected a Vehicle Mount.
The Vehicle Mount creates the platform you need for easy attachment of your device mount/holder.
Unless you have a holder from before
(not windshield suction cup mount)
we recommend you order a holder for
your device to complete your mounting solution. See illustration to the left.
Learn More |
| Find Your Device Holder |
 Shopping Cart Summary
You Just Added ():
-
Total Qty: @
Total: USD $
Items in Your Cart:
Cart Subotal: USD $
 Close
|
;)
;)
;)
